Gabatarwa
A aikace-aikacen alamar laser, lasers na fiber sune fasahar da aka fi amfani da ita don yiwa karafa da kayan masana'antu alama.
Mafi yawan gargajiya fiber Laser marking inji amfani Lasers ɗin fiber mai canzawa na Q. Duk da haka, a cikin 'yan shekarun nan. Na'urorin Laser na MOPA (Master Oscillator Power Amplifier) sun zama ruwan dare saboda sassaucin da suke da shi da kuma ingancin alamar da ya fi kyau.
Lasers na MOPA suna ba da damar sarrafa kansa bugun bugun jini fadi da mita, yana ba da damar aikace-aikacen ci gaba kamar Alamar launi ta bakin karfe, alamar baƙi a kan aluminum mai anodized, da kuma daidaitaccen zane-zanen micro.
Wannan labarin ya bayyana bambance-bambancen da ke tsakanin Lasers ɗin fiber na MOPA da Q-Switched, kuma yana taimaka wa masu amfani su zaɓi laser ɗin da ya dace don aikace-aikacen su.
Maɓallin Takeaways
- Lasers na MOPA suna ba da damar sarrafa faɗin bugun jini da mitar mai zaman kansa
- Lasers masu canzawa na Q sun dace da aikace-aikacen sassaka mai zurfi
- Lasers na MOPA suna ba da damar yin alamar launi ta bakin karfe da kuma alamar baƙin ƙarfe mai anodized
- Ana amfani da fasahar biyu sosai a tsarin alamar laser na masana'antu
Menene MOPA Fiber Laser?
A MOPA fiber Laser yana amfani da na'urar laser iri tare da amplifier na fiber don samar da fitowar laser mai pulsed.
Idan aka kwatanta da na'urorin laser na Q-switched na gargajiya, na'urorin laser na MOPA suna bayar da:
- Faɗin bugun jini mai daidaitawa
- Mita mai daidaitawa
- Ƙarin sassaucin sarrafa siga na laser
- Ingancin sarrafawa mafi kyau ga kayan aiki masu mahimmanci
Jerin da za a iya daidaitawa sun haɗa da:
| siga | range |
|---|---|
| Gyara Gida | 1-400 ns |
| Frequency | 1 kHz - 2 MHz |
| Ƙarfin wutar | Dubun kW |
Saboda wannan sassauci, ana amfani da laser MOPA sosai a cikin masana'antar aikace-aikacen alamar laser mai inganci.
Menene Laser ɗin Fiber Mai Sauya Q-Switched?
Amfani da na'urorin laser na fiber Q-Switched Daidaitawar acousto-optical (AO) don samar da fitowar laser mai pulsed.
Halayen sun haɗa da:
- Faɗin bugun jini da aka gyara
- Daidaita mita mai iyaka
- Ƙarfin kuzarin bugun jini mai ƙarfi
Ana amfani da lasers ɗin Q-Switched don:
- Zane-zanen ƙarfe
- Alamar masana'antu ta asali
- Aikace-aikacen sassaka mai zurfi
Gabaɗaya sun fi dacewa idan zurfin sassaka mai ƙarfi Ana buƙata.
Babban Bambanci Tsakanin MOPA da Lasers ɗin Q-Switched
Babban bambanci tsakanin waɗannan fasahohin biyu yana cikin Sarrafa sigar bugun jini.
| Feature | Laser Q-Switched | MOPA Laser |
|---|---|---|
| Gyara Gida | Kafaffen | daidaitacce |
| Frequency | Limited | Wide kewayon |
| Sarrafa siga | Basic | Flexiblewarai sassauƙa |
| Alamar inganci | Standard | high ainihin |
| Tasirin Zafi | Mafi girma | Lower |
| Alamar launi | Ba zai yiwu ba | goyan |
Saboda na'urorin laser na MOPA suna ba da iko mafi girma, suna iya samar da haske mai haske. ƙarin sakamakon alama mai kyau.
MOPA Fiber Laser vs Q-Switched Fiber Laser (Kwatanta Aikace-aikace)
| Aikace-aikace | Laser ɗin Fiber Mai Sauya Q | MOPA Fiber Laser |
|---|---|---|
| Cire Fim ɗin Sirara / Shafi | Tsarin zai iya zama fari kuma ƙarshen saman zai iya zama mai kauri. | Faɗin bugun jini kaɗan tare da ƙarancin tasirin zafi. Tsarin yana nan yadda yake kuma ƙarshen saman yana da tsabta da haske. |
| Alamar Baƙi akan Aluminum ɗin Anodized | Yawanci yana samar da alamun launin toka ko ƙananan bambance-bambance ne kawai. | Zai iya samar da alamar baƙi mai zurfi, mai bambanci sosai ta hanyar daidaita sigogin laser. |
| Alamar Launi Bakin Karfe | Alamar launi tana da wahala kuma kewayon launuka yana da iyaka sosai. | Ana iya daidaita faɗin bugun jini da mita don ƙirƙirar nau'ikan tasirin launi iri-iri. |
| Cire Shafi Mai Sauƙi | Cire murfin yana yiwuwa amma gefuna bazai yi tsabta sosai ba. | Cire mai tsafta tare da gefuna masu kaifi da kuma ingantaccen sarrafa bayyananne. |
| Alamar Filastik | Kayan aiki na iya zama rawaya ko ƙonewa cikin sauƙi. Ingancin saman yana da ɗan kauri. | Ƙarancin tasirin zafi yana rage rawaya kuma yana inganta ingancin alama. |
| Zane Mai Zurfi Na Karfe | Ƙarfin sassaka mai ƙarfi, ya dace da sassaka mai zurfi amma yanayin saman na iya zama mai tauri. | Zurfin sassaka kaɗan ne amma yana samar da ƙanƙantar yanayin saman da kuma alamun tsabta. |
| Resistor / Rubutun Kayan Lantarki | Tasirin zafi mafi girma da ƙarancin daidaiton sigogi. | Faɗin bugun gajarta yana rage tasirin zafi kuma yana samar da layuka masu tsabta. |
| Lambar PCB 2D / Alamar Barcode | Ƙarfin bugun jini mai yawa amma yana da sauƙin kamuwa da layukan jan ƙarfe da kuma rufin da ke rufewa. | Alamar tsaftacewa tare da mafi kyawun bambanci, yana sa lambobin su zama masu sauƙin dubawa. |
Aikace-aikacen Lasers ɗin Fiber na MOPA
Alamar Launi Bakin Karfe
Laser na MOPA na iya samar da launuka daban-daban akan saman bakin karfe ta hanyar daidaita mita da faɗin bugun jini.
Aikace-aikacen hankula sun haɗa da:
- Logos
- Zane-zanen ado
- Kayan likita
- Kitchenware
Ba za a iya cimma wannan tasirin ta hanyar amfani da na'urorin laser masu canzawa na Q ba.
Alamar Baƙi akan Aluminum ɗin Anodized
Ana iya samar da laser na MOPA ta amfani da fasahar laser alamun baƙaƙe masu bambanci sosai akan saman aluminum mai anodized ba tare da lalata layin anodized ba.
Aikace-aikace sun haɗa da:
- Gidajen lantarki
- Mai amfani da lantarki
- Dabarun masana'antu
Daidaita Alamar Roba
Na'urorin laser na MOPA na iya rage lalacewar zafi da kuma hana yin rawaya yayin yiwa wasu robobi alama.
Wannan yana da amfani ga:
- Abubuwan haɗin lantarki
- Kayan motoci
- Gidajen filastik
Yaushe Ya Kamata Ka Zaɓar MOPA?
Ana ba da shawarar amfani da laser na MOPA idan aikace-aikacenku yana buƙatar:
- Alamar launi ta bakin karfe
- Alamar baƙi akan aluminum mai anodized
- Zane mai kyau tare da ƙaramin tasirin zafi
- Alamar masana'antu mai inganci
Lasers ɗin Q-switched har yanzu suna iya dacewa da zurfin sassaka ko aikace-aikacen alamar ƙarfe na yau da kullun.
Kammalawa
Ana amfani da na'urorin laser na MOPA da Q-switched sosai a tsarin alamar laser.
Duk da haka, na'urorin laser na MOPA suna ba da sassauci mafi girma da ingancin alama mafi kyau, wanda hakan ya sa suka dace da aikace-aikacen alama na gaba.
Yayin da fasahar sarrafa laser ke ci gaba da bunƙasa, Na'urorin laser na MOPA suna zama abin da aka fi so ga tsarin alamar laser mai inganci.
FAQ
Mene ne bambanci tsakanin MOPA da Q-switched fiber lasers?
Babban bambanci shine sarrafa bugun jini.
Laser na MOPA yana ba da damar daidaita faɗin bugun jini da mitar da ba ta canzawa ba, yayin da lasers masu canzawa na Q galibi suna da faɗin bugun jini mai tsayayye da kuma ikon sarrafa mita mai iyaka.
Shin lasers na MOPA za su iya yin alama a launi a kan bakin karfe?
Eh. Na'urar laser mai zare ta MOPA na iya ƙirƙirar na'urorin alamun launi a kan bakin karfe ta hanyar sarrafa sigogin laser waɗanda ke shafar layin oxide da aka samar akan saman ƙarfe.
Shin lasers na MOPA sun fi kyau don yin alama da laser?
Lasers na MOPA sun fi kyau ga Alamar daidaito, alamar launi, da kayan da ke da tasiri ga zafi, yayin da lasers ɗin Q-switched har yanzu suna iya dacewa da aikace-aikacen zane mai zurfi.
Injinan Alamar Lasisin Fiber Laser na Scotle MOPA da aka Ba da Shawara
Scotle tana ba da injunan tantance laser na fiber MOPA na ƙwararru waɗanda aka tsara don daidaita alamar ƙarfe, alamar launi ta bakin ƙarfe, da kuma alamar baƙin ƙarfe mai anodized.
Injin Lasisin Fiber Laser Scotle 60W / 100W / 200W / 300W
Ya dace da alamar launi ta bakin karfe, alamar baƙin aluminum mai anodized, da kuma sassaka ƙarfe mai inganci.
Injin Zane na Laser Fiber na Scotle 2.5D Plus
An ƙera shi don sassaka mai zurfi da sassaka mai sauƙi a saman ƙarfe.
Injin Lasisin Lasisin Fiber Laser na Scotle 3D Plus Dynamic Focus
Ya dace da saman lanƙwasa da aikace-aikacen alamar laser mai faɗi.
